RTL8723 WiFi and Bluetooth Integrated Module Support 802.11b G N and Bluetooth 4.0 Dual Mode(BW122)

Product Detail

RTL8723 WiFi and Bluetooth Integrated Module Support 802.11b G N and Bluetooth 4.0 Dual Mode(BW122)

FSC-BW112 is a small size and low profile of WiFi + BT Combo module with LGA (Land-Grid Array) footprint, board size is 13.2mm*12.0mm with module thickness of 2mm. It can be easily manufactured on SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer products. It provides USB interface for WiFi to connect with host processor and high speed USB interface for BT. It also has a PCM interface for audio data transmission with direct link to external audio codec via BT controller. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11n b/g/n MIMO technology and Bluetooth can support BT2.1+EDR/BT3.0 and BT4.0.




FSC-BW122 Datasheet:


Specification
Model	FSC-BW122
Chipset	RTL8723BU
Interface Type	USB2.0,PCM
Product Size(L*W*H)	12*13.4*1.6mm,Tolerance: +/-0.2mm
Power Supply	DC3.3V (±5%), 300Ma (Max)
Standards	WiFi: IEEE 802.11b,IEEE 802.11g,IEEE 802.11n BT: V2.1+EDR/BT V3.0/BT V3.0+HS/BT V4.0
Frequency Range	2.4~2.4835GHZ
Modulation Types	WiFi: 802.11b: CCK,DQPSK,DBPSK; 802.11g/n: 64-QAM,16-QAM,QPSK,BPSK BT: 8DPSK,p/4 DQPSK,GFSK
Working Mode	Infrastructure ,Ad-Hoc
Data Transfer Rates	WiFi:802.11b: 11,5.5,2,1 Mbps;802.11g:  54,48,36,24,18,12,9,6 Mbps 802.11n:150Mbps (Max) BT: 1Mbps for Basic Rate;2,3 Mbps for Enhanced Data  Rate
Sensitivity @PER	WiFi: 11M:-86dBm@8%PER,54M: -74dBm@10%PER 135M:  -68dBm@10% PER (Tolerance : ±2dB) BT:-89dBm@1Mbps,-85dBm@2Mbps,-83dBm@3Mbps (Tolerance :  ±2dB)
RF Power	WiFi: 16dBm@11b,14dBm@11g,13dBm@11n (Tolerance : ±2dB) BT: +5.5~+10.5dBm for Class 1.5 output power
Antenna Type	Connect to the external antenna through the half hole
Operating Temperature	Working Temperature: -10?~50? Storage Temperature: -40?~70?





 Features
 
 Operate at ISM frequency bands (2.4GHz)
 USB for WiFi and Bluetooth
 IEEE standards support: IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.11d,IEEE 802.11e,IEEE 802.11h,IEEE 802.11i .
 Fully Qualified for Bluetooth 2.1+EDR specification including both 2Mbps and 3Mbps modulation mode
 Fully qualified for BIuetooth 3.0
 Fully qualified for BIuetooth 4.0 Dual mode
 Full–speed Bluetooth operation with Piconet and Scatternet support
 Enterprise level security which can apply WPA/WPA2 certification for WiFi.
 WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rate
  
 Application
  
 Health & Medical devices
 Wireless POS
 Measurement and monitoring systems
 Industrial sensors and controls
 Asset tracking
  
  PIN Definition Descriptions
  

Pin	Pin Name	Pin Descriptions
1	3.3V	Main power voltage source input
2	DM	USB -
3	DP	USB +
4	GND	Ground
5	GND	Ground
6	RF0	RF/BT output
7	RF1	Floating (NC)
8	CLK	Floating (NC)
9	PCM_IN	PCM Control input
10	PCM_OUT	PCM Control output
11	PCM_SYNC	SYNC signal
12	PCM_CLK	PCM crystal
13	WOWLAN	Chip wakeup host pin      (When not used wake up, it is default idle.)
14	SUSPEND	Host wakeup chip pin (When not used PCM, it is default idle.)
	Total 14Pins	13.0*12.2*2.0mm Package

 
   
    

 
 FAQ:
  
 Q1. Do you have any MOQ limit for an order?
 No MOQ Limit, we welcome any client to purchase the sample for test purpose.
  
 Q2: How to proceed an order?
 Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and shipping.  
  
 Q3: Do you accept Alibaba online orders?
 Sure! We prefer to fulfill orders under Alibaba Trade Assurance system, since both parties will be protected.
   
 Q4: Do you provide samples? Is it free or extra?
 No, we are not offer the free sample, however once the order confirmed after sample approval, we will return the sample cost to you.
  
  
 Company Introduction:
  

Feasycom focus on the researching and developing of IoT (internet of things) products, including Bluetooth Modules, WiFi and LoRa Modules, Bluetooth Beacon, etc. With more than 10-year experiences in the wireless connectivity, which ensure us have the capability for providing low-risk product development, reducing system integration cost and shortening product customization cycle to thousands of diverse customer worldwide.

 

Feasycom’s engineering and design services include:

 

SDK

APP Support

PCB Design

Development Board

Firmware Development

Depth Customization

Certification Request

Turn-Key Production Testing & Manufacturing

 

Our products and services mainly apply to Automotive, Point of Sale, Home Automation, Healthcare and Engineering, Banking, Computing, Vending Business, Location, Lighting and more.

 

Aiming at “Make Communication Easy and Freely”, Feasycom is dedicated to design and develop high-quality products, efficient services to customers, for today, and all days to come.

    
  
 
    
  Packaging & Shipping
  
 1.Material delivery will be arranged by DHL/UPS/Fedex/TNT/EMS,normally it will take 3-7 working days 
 to arrive in most of the countries.
  
 2.We can also help you ship the goods by air line, then you fetch the packet from your local airport ,normally it takes about 2-7 days.